Weld Creations provides production welding and contract fabrication for manufacturers across Southern California. We take repeat welded parts from first article to recurring runs: we build the fixtures, weld to an approved sample, and deliver the same part every release. The work is TIG welding for precision and stainless parts, and MIG where speed and thicker steel make sense.
Production work is where a welding shop proves itself. Making one good part is craftsmanship. Making the five-hundredth part identical to the first takes process, and that’s what this page is about.
How we run a production job
1. Quote from your drawing and volumes. We price on the quantity per release and the annual volume, because fixtures and setup are amortized across the whole program.
2. First article. We weld and inspect a first article and send it, or its inspection report and photos, for your approval. Nothing runs until you sign off.
3. Fixture and process. We build a fixture that locates every part identically, then lock in the weld sequence, parameters and filler so the process is repeatable, not dependent on who’s welding that day.
4. Run and inspect. Parts are welded to the approved process and inspected against the first article and your drawing. If your quality plan calls for in-process checks or sample inspection, we build that in.
5. Deliver and repeat. Parts ship on your schedule. For recurring parts, the fixture and process stay ready for the next release.
Distortion control
Welding puts heat into a part, and heat moves metal. On a precision component, distortion can wreck a machined surface or pull a hole out of position. We control it through:
- Fixturing that holds geometry during welding and cooling
- Weld sequencing that balances heat around the part
- Heat management, especially with TIG welding, where heat input is precisely controlled
- Stitch-then-finish strategies on long seams, where the design allows
The gallery shows a typical example: a run of stainless brackets, each a machined, bored block fillet-welded to a drilled plate, with consistent weld profiles and no distortion in the machined features.
One supplier for the finished part
Most production parts need more than welding. We deliver the finished part, coordinating the steps before and after welding in-house or through our partner network:
- Before welding: laser, waterjet and saw cutting, forming and bending, machining
- After welding: machining of welded assemblies, grinding and polishing, passivation, powder coating, anodizing and plating
- Inspection and documentation: material certs, first-article reports and dimensional inspection as your quality plan requires
You issue one purchase order and deal with one point of contact.
Materials
Production runs in stainless steel (304/304L, 316/316L), aluminum, carbon and chromoly steel, titanium, and nickel alloys like Hastelloy. For product-contact parts in pharmaceutical and food equipment, see sanitary welding.
Good fits for production welding
- Brackets, mounts and weldments that combine machined and fabricated parts
- Frames, stands and enclosures built to repeat. See custom metal fabrication.
- Stainless hoppers, chutes and machine components for pharmaceutical and food equipment manufacturers
- Assemblies for machine shops and sheet metal shops that need a dependable welding partner
- Products moving from prototype to production, where we can help refine the design for welding and cost
Design for welding: lowering cost per part
On production parts, small design decisions multiply across every unit. When you share a design early, we can suggest changes that cut welding time and rework without changing function:
- Self-locating parts. Tabs, slots and notches that locate components make fixturing simpler and fit-up faster and more consistent.
- Weld size to requirement. Oversized welds add time and heat, and heat means distortion. We size welds to the load, not to habit.
- Accessible joints. Welds the torch can reach in one orientation reduce repositioning and improve quality.
- Fewer, longer welds. Consolidating short stitch welds into continuous seams, or eliminating them with formed features, where the design allows.
- Weld-friendly material pairings. Avoiding combinations that need special fillers or procedures unless the application requires them.
We can review designs moving from prototype to production and suggest where welding cost can come down.
Request a production quote
Send the drawing, material, quantity per release, estimated annual volume, finish and inspection requirements, and your delivery schedule. For a printable overview, see our capabilities. We reply within one business day.